2 Aftermarket front coils made in the USA (These springs have 8 turns and are longer than the stock w/ 163 lbs of spring rate)2 Aftermarket rear coils made in the USA (These springs have 9 turns and are more heavy-duty than stock w/ 128 lbs of spring rate)Front & Rear coil spacer kit made out of anti-corrosion aluminum and stainless steel material with install instructions* Rear spacer only used if running heavy cargo such as an HD rear bumper with tire carrier. 2 Bilstein brand front struts imported from Germany2 Bilstein brand rear shocks imported from Germany4 new aftermarket brand top mounts for the front struts and rear shocks. Made in the USA.Heavy Duty 4.8 mm thick rally-style Skid Plates to protect front undercarriage and sides. Made in the USA. * The skid plate version with the sides only works for 1998-2006 Beetles. This stage 3 suspension kit has been tested using a 2000 VW Beetle 1.8 Turbo in Guanajuato central Mexico on the same stages of the WRC Mexico. Recently used by VW Beetle racers at the GAMBLER 500 RACE in 2018 and 2019. These suspension kits will fit only the following VW Beetle MK4 models: New Beetle 1998-2010
This Stage 3 kit will lift the front section by 2 inches depending if you have the TDI or Gas Engine. The lift on the rear is 2 inches without anything heavy in the rear cargo area. This kit consisting of high-quality aftermarket parts will not affect the camber of your vehicle. No install instructions included for the suspension, only for the spacer kit and skid plate. Must be installed by a certified mechanic or shop.